Zhu Tang (Suzhou) Technology Co., Ltd.
Zhu Tang (Suzhou) Technology Co., Ltd Reliability & Precision
Add to Cart
CNC Transformer Automatic Coil Winding Machine With Two Wire Guide
Brief Introduction
CNC Transformer Automatic Coil Winding Machine With Two Wire Guide ZPX500-2 can be used to wind different specifications of round or flat wires. The winding machine is provided with two wire guides, which can be used to wind two same coil simultaneously and significantly improve production effectiveness. One servo motor with 750w is used to drive the wire guide, which guarantees the precision start and stop action. Two axial coil stand is also provided along with the machine. Wire coil reel can be put on the coil stand. There are pneumatic tensioner on the coil stand for providing tension. Moreover, there are also five pulleys on the coil stand, which is for providing tension for round wire. With cantilever structure for touch screen, it is very easy to operate the machine.
Main Features
Main Parameters
Typical standard specifications of ZPX500-2 are shown below, however these can be easily modified as requested.
| Center Height: | 900mm |
| Wire guide: | 2 pcs |
| Maximum Height Each Coil: | 500mm |
| Shaft Length: | 1200mm |
| Maximum Flat Wire Size: | 5x12mm |
| Round Wire Diameter: | 0.3-5.0mm |
| Maximum Rotating OD.: | 800mm |
| Maximum Winding Speed: | 160RPM |
| Speed Regulation: | Variable frequency and stepless speed regulation |
| Winding Motor Power: | 7.5KW |
| Minimum Spread Pitch: | 0.01mm |
| Counting Mode: | 5-digit counting |
| Max. Turns Number Preset: | 9999.9 |
| Counting Range: | 0 - 9999.9 |