Zhu Tang (Suzhou) Technology Co., Ltd.
Zhu Tang (Suzhou) Technology Co., Ltd Reliability & Precision
Add to Cart
Automatic 3-head Wire Coil Winding Machine For Making Oil Immersed Transformer
Description
Automatic 3-head Wire Coil Winding Machine For Making Oil Immersed Transformer ZPX400-3 is a special machine to be used to wind copper or aluminium wire, this machine can be used to wind three same coils at the same time, which significantly improves efficiency. This machine is provided with main motor, servo motor, touch screen, wire guide unit, and so on. When the machine starts, the rotating speed is slow at first, after several seconds (0-5 seconds can be preset) , the speed will reach the speed preset. With 11kw motor, the machine can provide strong pulling force. The touch screen makes the operation easy.
Main Components
1. Main steel frame
2. Main winding unit
3. Automatic wire laying unit
4. PLC based control system
5. Pneumatic system
6. Servo motor
7. Foot pedal
Technical Parameters
Typical standard specifications of ZPX400-3 are shown below, however these can be easily modified as requested.
| Height From Spindle to Floor: | 900 mm |
| Square Shaft Size: | 40*40*1500 mm |
| Round Wire Diameter: | 0.3-4.0 mm |
| Max. Flat Wire Size: | 5x12 mm |
| Finished Coil ID.: | Depends on your mold (shaft size 40*40 mm) |
| Max. Finished Coil OD.: | 800 mm |
| Max. Each Coil Length: | 400 mm |
| Insulation Decoiler Number: | 1 pc |
| Winding Motor Power: | 11 kw |
| Winding Speed: | 0-160 rpm |
| Winding Speed Regulation: | Variable frequency and stepless speed regulation |
| Control system: | PLC |
| Spread Pitch: | Min. step: 0.01 mm |
| Counting Mode: | 5-digit counting, preset by segments, total numbers of turns preset, reversible counting, and power off memory, etc. |
| Max. Turns Number Preset: | 9999.9 |
| Counting Range: | 0 - 9999.9 |